The sputnik light fixture is a modern sense of lighting that brings a burst of light with a style of the Cold War. This lamp incorporates 10 light fixtures with 10 balls chrome to give an effect of explosion, which can be quite dazzling.
Instructions to make sputnik light fixture: insert 1 1/2-inch pipe conduit in Styrofoam ball. Move the tube back and forth until the cylinder Styrofoam. Drill small hole in each ping-pong ball. Put glue on the end of stiff wire and insert one in each ping-pong ball. Put glue on the other end of stiff wire and insert it into the Styrofoam ball.
Drill a hole through the 1-inch hole. Insert a light pendant cable through a conduit pipe 1/4-inch. Paste the hanging light to a pipe end. Thread the wire through the hole of 1/4-inch and 1-inch hole. Put glue on the other end of the pipe and push the Styrofoam ball, plug the hole 1/4-inch.
Pass the five wires through the conduit line of 1 inch. Put glue on the end of pipe and slide back into the Styrofoam ball, plug the hole 1-inch. Spray paint all chrome mounting and let stand for four hours. Apply a second coat. The sputnik light fixture is finishes
12 How To Make Sputnik Light Fixture Photos